Revizyon Kalça Sistemi

Demonstrasyon ve bilgi için lütfen iletişime geçiniz. +IMDHip Kalça Protezi 3 modelden oluşmaktadır; Kısmi, Toplam ve Revizyon. OrtoHip kalça deformiteleri ve kırıklarına en kalıcı çözümü sunuyor. Protez işlemi, çimentolu veya çimentosuz Calcar, Zweymüller, Corelsystem ve Revizyon uygulamalarını içerir. Partialand Total işlemleri bu sistemlere uygun olarak yürütülmektedir. + CoCr döküm ve titanyum dövme yöntemlerinin hassas tekniği ile üretilirler.

Ürün Kodu :	RVS-HIP
Ürün Kategorisi :	Protezler

Açıklama
Ürün Özellikleri

REVISION TOTAL HIP SYSTEM

+ Revision total hip prosthesis is the procedure of removing the existing prosthesis as a result of complications such as loosening of the hip and prosthesis, pain and infection in the patients who have undergone prosthesis surgery, and then placing the appropriate and true prosthesis.

+ It is manufactured from CoCr and Titanium materials.

+ Acetabular cup, Liner and Metal Head components are same used in Total Hip Prosthesis.Therefore, different femoral stem options are available in revision surgery.

1 STANDARD REVISION FEMORAL STEM

+ Manufactured from CoCr and Titanium materials.
+ Cemented and Cementless options are available
+ Manufactured with 135 degree neck angle and cone of 12 / 14 mm.
+ Surface grooves on the stem, provides more bone integration in cementless cases.
+ Cemented Stem is suitable for use with cement with polished surface.
+ There is a groove at the tip for fully engagement with the bone and full stability, which improves adherence to the bone with compressive progression.

+ It has these dimensions:

11 / 12 / 13 / 14 / 15 / 16 / 17 / 18

2 MODULAR REVISION FEMORAL STEM

+ Manufactured from CoCr and Titanium materials.
+ Cemented and Cementless options are available
+ Manufactured with 135 degree neck angle and cone of 12/14 mm.
+ Consists of two parts; body and stem.
+ The body and stem are fixed to each other with titanium screws and then rotated.
+ Body and Stem are manufactured in different sizes and lengths to create the most appropriate size and implant for the bone structure.

+ Body – 42 / 48 / 58 / 68
+ Stem – Ø 12 / 13 / 14 / 16 / 18
142 / 172 / 212 mm

3 METAL HEAD

+ Manufactured from CoCr material with a polished surface.
+ Interior conic diameter is manufactured in accordance with 12 / 14 mm cone specifications of the femoral stem. It has 5 different sizes to adjust the interior depth size.
+ Has an exterior diameter of Ø28mm, Ø30mm, Ø32mm and -6 /-3 / 0 /+3 /+6 interior conic diameter sizes.

4 LINER

+ Manufactured by PE 1020 material.
+ Special locking feature to be locked into acetabular cup.
+ 0 / 10 / 20 degrees are available.
‍
+ 42 / 44 / 46 / 48 – can be used with – 28 mm metal head
+ 50 / 52 / 54 / 56 – can be used with – 32 mm metal head
+ 50 / 52 / 54 / 56 – can be used with – 36 mm metal head

5 CEMENTLESS ACETABULAR CUP

+ Manufactured from CoCr and Titanium materials.
+ The exterior surface is coated with HA, which enables better bone integration.
+ The grooved screw points allow fixation to the bone.
+ Anti-rotational spikes on the side surfaces help ensure stabilization.
+ Insert is locked with a special locking mechanism.
+ Manufactured in the dimensions:

42 / 44 / 46 / 48 / 50 / 52 / 54 / 56 / 58 / 60 / 62

Ürün Formunuz Başarıyla İletilmiştir

Ürünler